检查刀削面机离心泵管路和结合处有没有松动现象出现。用手转动离心泵，看看离心泵是不是灵活。向轴承体内加入轴承润滑机油，观察油位是不是在油标的中心线处，润滑油需要及时更换或补充。拧下离心泵泵体的引水螺塞，灌注引水。把出水管路的闸阀和出口压力表及进口真空表关好。点动电机，看看电机转向是不是正确的。开动电机，当离心泵正常运转后，再把出口压力表和进口真空泵打开看其显示出适当压力后，逐渐打开闸阀，同时检查电机负荷情况。尽量控制离心泵的流量和扬程在标牌上注明的范围内，可以确保离心泵在高效率点运转，才能获得大的节能效果。如发现离心泵有异常声音要立即停车检查原因(图\文www.wxjpby.com/)。
中译英：
Check the sliced noodles machine centrifugal pump and union department has no loose phenomenon. Hand rotating centrifugal pump centrifugal pump flexible have a look, is it right?. The bearing is added in the bearing lubricating oil, observe the level is it right? Standard in the oil of the center line, the need for timely replacement of lubricating oil. Unscrew the centrifugal pump body water plug, pouring water. The outlet pipeline valve and outlet pressure gauge and vacuum gauge shut. Move the motor, the motor is it right? Have a look to the right. The motor is started, when the centrifugal pump in normal operation, the outlet pressure gauge and vacuum pump to open the show proper pressure, gradually open the gate, at the same time to check the electrical load. Try to control the centrifugal pump flow and head in signs marked on the range, can ensure that the centrifugal pump at maximum efficiency point operation, in order to achieve maximum energy saving effect. Such as the discovery of centrifugal pump to stop and check the reason for abnormal sound.