不锈钢离心泵重量轻、体积小、整体结构合理、维护方便,不锈钢离心泵具有很多优点,但是仍需在一定条件下才能更好的发挥泵的功效:液体温度:-15℃ ~ 120℃。环境温度:高40℃。如环境温度超过40℃或海拔高度超过1000m时,由于空气密度低导致电机冷却效果不好,电机额定输出功率会相应减少。因此,必须选用更高功率的电机。小进口压力:在下列情况下应计算进口压力。 液体温度较高;流量明显比额定值大;液体所需的吸程很大;进口管路很长;进口条件比较差 。实际使用显示,不锈钢离心泵具有耐腐、耐磨、耐高温、不老化、机械强度高、运转平稳、结构合理、密封性能严格可靠、拆卸检修方便、使用寿命长等优点。不锈钢离心泵广泛应用于供水系统,工业增压系统,农业灌溉等(图\文www.wxjpby.com/)。 中译英: Stainless steel centrifugal pump light weight, small size, reasonable integral structure, convenient maintenance, stainless steel centrifugal pump has many advantages, but still needed in certain conditions can play a better pump efficiency: liquid temperature: -15 ℃~ 120 ℃. Environment temperature: 40℃the highest. If the ambient temperature is over 40 ℃ or altitude of more than 1000m, due to low air density causes the motor cooling effect is not good, the motor rated power output will decrease accordingly. Therefore, we must choose the higher power of motor. Minimum inlet pressure: in the following cases should be calculated under the inlet pressure. Liquid temperature is higher than the rated value; flow; the liquid absorption process required a lot; the inlet pipeline of long; import conditions are relatively poor. The actual use of display, stainless steel centrifugal pump has the corrosion resistance, wear resistance, high temperature resistance, not aging, high mechanical strength, stable operation, advanced and reasonable structure, reliable sealing performance, convenient maintenance, disassembly of the strict use of long life etc.. Stainless steel centrifugal pump is widely used in water supply system of turbocharging system, industry, agricultural irrigation and other.
|